OR3GUN™ Enhanced Competition Follower for Mossberg® 930/935

The OR3GUN Enhanced Competition Follower™ (ECF-930) for Mossberg 930/935 series shotguns is an upgrade to the proper feeding of shells in any Mossberg 12-Gauge Shotgun with or without an extended magazine tube.

Natural Habitat	Application	Features	Color	Price	Status	ORDER
	Competition 3-Gun Trap/Skeet	Teflon® Finish (w/ Radiused Edges) Bright Color (Easy to Show Clear)	OR3GUN Marine Blue	$19.95	Coming Soon Est. Ship 04/20/15

While it would seem that the last thing the world needs is another 12-Gauge Follower, years of competitive shooting prompted us to design one anyway for a number of reasons. As the OR3GUN Project™ was born out of 3-Gun, our products are designed around the needs specific to the sport.

Primarily, our experience inspired us to create a follower that is easier to quickly distinguish as 'clear'.

Wait just a second, isn't orange or red a pretty good color for that? The list of things to go wrong in hasty quad loading and/or shotgun dump have left many a shooter with a DQ when discovered their shotgun wasn't empty after all. Here's how the industry's chosen standards for shot shell and follower colors have contributed:

The majority of bulk pack and other common shot shell types seen in 3-gun can be quickly mistaken for standard followers in both color and design. When an RO that may not be used to what a shooter is running checks a grounded shotgun in a dump box, we like to give them every possible reason to take a closer look. Unless you run rarely encountered blue shot shells, the OR3GUN Enhanced Competition Follower is a better contrast for 'clear'.

What are the odds of loading a shell backwards, really? We used to think it was just the local newbie that did things like that, until we saw a popular sponsored shooter on Facebook with their gear all loaded up like this for a stage:

The image quickly disappeared from their sponsor's feed after becoming Facebook Fodder for the day, but it was a lesson that we ALL make mistakes, no matter how many logos are on our shirts.

We didn't simply create a different colored follower and call it a day. You will find that ours is long enough for proper transition over less than perfect magazine tube extensions, but short enough to avoid consuming valuable shell capacity in most applications. The inside is sized to accommodate, yet cradle the largest variety of OEM and aftermarket springs. We have anodized our 6061 T6 alloy follower with a Teflon seal for reduced friction. There is something else just a bit different about them. Don't worry, we're getting around to it.

Bolt closed/empty tube reloads and starts are where you will really start to see the benefits of our design. Rather than using the traditional machining process of a simple chamfer on relevant edges, we have taken a more rounded approach.

The lack of hard edges helps the anodizing and Teflon wear longer and our radius approach is a better way to keep from hanging the crimped end of your shot shell up on any portion of the follower. The rounded edges also glide smoothly over seams and transitions in your magazine tube or extension.

Since we're from Oregon, we also made sure that our Drain (the name of an actual town near us) is amply large as well. We have designed the end to peek out just a bit more than most followers to satisfy your favorite RO and allow you to feel the difference.

Other than ALL of that, it IS just another follower. Unless that now makes it a LEADER...

The Enhanced Competition Follower will begun shipping in mid April with an introductory price under $20.